Fomtec Alpha B -30 (also called Fomtec AB-30) is a ready to use (premixed) film forming foam solution for fires of class A and B. Unlike regular AFFF premixes, Fomtec AB-30 has excellent storage stability of atleast 5 years under correct storage conditions. The product has superior fire performance on class A fires compared with regular AFFF premix solutions. Fomtec AB-30 is freeze protected to -30 degrees C and can be used in extinguishers or systems that will be stored/installed in cold areas.

Fomtec AB-30 is intended for use on class A and B fires. It can be used with both aspirating and non- aspirating discharge devices. It is compatible with all dry chemical powders.

Fomtec AB-30 can be used in:

l  Fire extinguishers

l  Foams systems

The equipment should be designed to the foam type.

Fomtec AB-30 has been designed to give the best properties of

-   Aqueous film forming foam.

-   Class A fire extinguishing agent.

The fire performance of Fomtec AB- 30 has been tested and documented according to EN 1568 part 3, and achieves 13 A / 144 B according to EN 3 when used in an appropriate fire extinguisher.

Appearance

Clear Amber Liquid

Specific gravity @ 20°C

1.12 +/- 0.01 g/ml

pH

7.5 +/- 0.5

Freezing point

- 30°C

Spreading coefficient mN/m

> 3

EN 3 rating using a 6 liter extinguisher

13A, 144B

Stored in original unbroken packaging or correctly filled in appropriate fire extinguisher or foam storage tank the product will have a long shelf life. The recommended storage temperature range of Fomtec AB-30 is from -30°C to 50°C. Shelf life of atleast 5 years will be found in temperate climates. Foam Solutions should only be stored in stainless steel or plastic containers. Since electromagnetic corrosion can occur at joints between different metals when they are in contact with foam concentrate, only one type of metal should be used for pipelines, fittings and tanks employed in the storage of foam solution.

We supply Alpha B-30 in 25-liter cans and 200-liter drums. We can also ship in 1000-liter containers or in bulk.

Meets the requirements of the standard EN 1568, part 3.